Hydraulic Tappet Assembly.005 - Jims 2464-1

Jims #: 2464-1

Jims.005 oversize hydraulic tappet includes installed roller assembly.

Order hydraulic unit and nuts separately. **NOTE: Tappet adjustment will make the pushrod tight. Wait 5-15 minutes or longer to fully bleed off the hydraulic tappet. Make sure engine is not rotated while pushrods are tight. Pushrod will spin with your fingers after the tappet has bled off. Never turn engine over if the pushrod will not spin with your fingers after adjustments were made.

Fitment: