York

York #: 26-0125-22 22 Tooth transmission sprocket kit with a.500 offset for 530 chain. Includes sprocket spacer. For 5 speed models. The 3 holes ar...

Clutch drum starter ring gear is 102 tooth bolt-on type. Replacement ring gear for stock clutch drums. Bolt-on ring gear includes screws. Measureme...

York #: 148130 Clutch drum starter ring gear is 102 tooth bolt-on type. Replacement ring gear for stock clutch drums. Bolt-on ring gear includes sc...

York #: 71096 Starter ring gear is 106 tooth is press fit type. Measurements: Inner Diameter: 6-1/2 inches Outer Diameter: 9 inches Fitment: 2007...

17 Tooth Engine Sprocket *NOTE: Sprocket has a 7/16 inch offset from the center of the spline to the center of the tooth profile. For use with a 53...

OEM #: 37913-90 Replica 6 steel drive clutch plates. Fitment: 1991-1997 FLST 1991-1997 FLT 1991-1997 FXD 1991-1994 FXR 1991-1997 FXST 19...

OEM #: 37701-71A Kick clutch drum with 9 tooth ratchet plate. For use with kick starter models only. Fitment: 1970-1980 XL

OEM #: 37716-81 Clutch drum sprocket assembly with ring gear. Clutch drum includes ring gear that is welded on. Fitment: 1981-1984 XL

York #: 26-0013-24 24 tooth splined engine sprocket. Fitment: 1955-1969 FL

York #: 26-0006-24 This 24 Tooth transmission sprocket has 2 holes and a.810 inch offset. For 5 speed models. It allows the installation of a 180 t...

York #: 26-0007-24 This 24 tooth transmission sprocket with 2 holes and a.900 inch offset allows the installation of a 180 tire without transmissio...

This 25 tooth splined engine sprocket has a 1-1/4 inch offset. Measurements:Height: 2 inches Fitment: 0 Custom

OEM #: 37707-98A Bare clutch drum only with a 102 tooth starter ring gear installed. Clutch drum is 36 tooth. Bearing and snap ring not installed. ...

45 clutch drive plates are riveted as original. Set includes 2 double sided plates. Fitment: 1941-1973 G 1941-1952 W

45 inch clutch kit includes Replica friction plate steel drive plate two full riveted plates one half plate and two steel drive plates with bumpers...

Engine sprocket kit includes a 22 tooth motor sprocket with nut and key and a York 35 x 2 x 96 chain. All components are packaged inside a V-Twin m...

York #: 0205005 Big Fixx clutch hub roller Kit includes long rollers to replace ball bearings and cage on clutch hub on 45 inch W and G models. The...

York #: 37873-41 · OEM #: 37873-41, 2479-41A 45 inch W/G clutch pressure plate is constructed of OEM steel and uses a stock adjuster screw and nut ...

York #: 37931/37952-41 · OEM #: 37931-41, 37952-41, 2481-41A Replica clutch friction plate set includes two friction discs and one 1/2 inch frictio...

Engine sprocket kit includes a 33 tooth motor sprocket with nut and kit and a 35 x 2 x 100 link York primary chain All components are packaged insi...

OEM #: 41474-35, 2043-35 45 inch WL rear 41 tooth sprocket kit. Replacement for brake drums with rivet on sprockets. Includes dust ring rivets dowe...

OEM #: 37568-41, 2473-41A 45 inch WL/G clutch hub ball retainer includes 7/32 inch steel balls. *NOTE: For use with 45 inch W/G clutch hub. Notes:S...

York #: 37287-41 · OEM #: 37287-41, 2446-41 45 inch WL/G clutch pushrod assembly with bearing Fitment: 1941-1973 G 1941-1952 WL

York #: 16459 5-Spoke rear sprocket with a chrome finish. Sprocket is 51 tooth with a 9.8mm offset. NOTE: Remember a larger sprocket on rear means ...