18 Spring Fork Assembly Black - V-Twin 49-1762 - OEM 67129-37A

OEM #: 67129-37A

Black spring fork assembly is completely assembled with inner springs. Fork has a 7/8 inch non removable stem.

*NOTE: Rocker set not included must order separately as required. For 45 Solo applications rockers with 3/8 inch axle holes are mounted on the inside of the fork legs using 7/16 inch threaded stud. For 1941-57 Servi-Car applications offset rockers are mounted on the outside of the fork with a bolt on 5-bolt lug star hub wheel and studs that are 1/2 inch. Rocker mount holes are drilled to 7/16 inch but must be enlarged to 1/2 inch for offset rockers. The distance between the rockers measure 6.5 inch. The distance between the rockers measures 6-1/2 inch. *NOTE: We measure from the top of the rear leg (tube) to the front axle center line.

Measurements:

• Length: 18 inches

Notes:

• Suggested to use with Rocker Set Black for offset rockers.
• Suggested to use with Fork Rocker Set Black for inside rockers.
• How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits to the axle position. This is the effective length as it is the length
• from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
• height. This Spring Fork assembly accepts a 3/4inch axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1inch stem utilized tapered bearings for
• ease of installation.

Fitment:

Installation instructions (PDF)