CHOP CULT HOME
NEWS   FORUM   EVENTS   CLASSIFIEDS   BLOGDUMP   COMMUNITY   MEMBERS

Making Fender Struts with Special '79

 

Okay, it's time to tackle fender mounting on your project, but you want the finished assembly to be rock solid. Can't blame you for that. In this installment of ChopCult Metal Shop, guest fabricator Jason Roche at Special '79 attacks the problem with customary skill. Class is now in session.

The materials for these struts can vary, but my choice for these struts is to use 304 stainless, 5/16”-18 x 1” threaded bungs and matching counterbore bungs for allen head cap bolts available at Lowbrow Customs. I believe they even sell a complete kit that includes everything you need for this project. I already had some ½” stainless rod stock, so I’ll just be using the bungs I scored from them.

I’ll be using a TIG welder to weld these struts but you can chose a MIG or gas setup if you’re more comfortable with that. Besides the welder, the only other specialized tools being used are an angle grinder (with a flap wheel and some cutoff discs) and an oxy-acetylene torch.


How to fabricate fender struts_01

 

How to fabricate fender struts_02

 

How to fabricate fender struts_03

 

How to fabricate fender struts_04

 

How to fabricate fender struts_05

 

How to fabricate fender struts_06

 

How to fabricate fender struts_07

 

How to fabricate fender struts_08

 

The first thing you need to do is to determine the connection points where you’ll want to bolt the struts. On the fender itself, I like to brush on some blue machinist layout dye so I can easily see the areas I scribe the center marks I’ll be drilling out. The same goes for the areas on the axle plates for the lower mount point. Use a center punch to mark the center for drilling on the fender and drill out a hole with a step bit all the way up to ½” (you can skip this step, read below). The lower mounting holes on the axle plates will be drilled to 5/16”.

 

 

At this point, I cut one of the 5/16”-18 x 1” bungs in half and turn down one side in the lathe to ½” in diameter and 1/8” in depth. I’m doing this so it will plug into the holes we drilled in the fender and help with holding the bung in place while welding. The drilling of the fender and turning down of the threaded bung can be skipped if you don’t have a lathe; just weld the bung to the fender without being a fancypants like me. Tack and weld the threaded bungs to your fender. After they cool, bolt the counterbored bungs to the threaded bungs on your fender with your allen cap screw.

 

How to fabricate fender struts_10

 

How to fabricate fender struts_11

 

How to fabricate fender struts_12

 

How to fabricate fender struts_13

 

How to fabricate fender struts_14

 

How to fabricate fender struts_15

 

I like to weld a longer piece of the ½” stainless rod to one of the counterbored mounting bungs so I can bolt it to the hole I drilled in the axle plate and have a nice solid mount to heat with an oxy-acetylene torch and bend the strut to the shape I want. After I’m happy with the bends, I’ll let the strut cool and pivot it up to the counterbored bung we mounted to the bung on the fender, mark and cut the strut to the length needed. Once a good fit is achieved, tack the bung solidly and remove for final welding. Check strut fit after cooling and adjust if needed. Repeat techniques for the second strut.

 

How to fabricate fender struts_17

 

How to fabricate fender struts_18

 

Your fender should now be strong enough to hold whatever size female you can talk into riding on the back of your two-wheeled deathtrap.

SPCL79 Fabrication, over and out, stay gold, keep on keepin’ on, or add your favorite catch phrase here.


Comment with Facebook


 
 

Comment with Chopcult (21)

Commented on 8-12-2011 At 11:55 am
 

Beautiful work!!

Commented on 8-12-2011 At 01:42 pm
 

nice. I love metal shop.

Commented on 8-12-2011 At 02:51 pm
 

I hate it!!!! Looks like crap and the bends are gay!!!!
Wait, dang it, I gotta learn to control my jealousy.
Great little write up. Should have more of these "metal Shop" features. They are always interesting.

Commented on 8-12-2011 At 03:58 pm
 

I really dig the shape of the struts from the rear

Commented on 8-12-2011 At 08:00 pm
 

You bastards and your skills and tools and shit!!!!

Commented on 8-12-2011 At 09:24 pm
 

Great write up!
Is that an oil-in-frame set up I see?

Commented on 8-12-2011 At 09:59 pm
 

Love the How To's... Great post!

Commented on 8-12-2011 At 11:44 pm
 

simple details are the best...

Commented on 8-13-2011 At 12:36 am
 

Hats off to another awesome tutorial.. Thank you!

Commented on 8-13-2011 At 12:40 am
 

Jason you make it look so damn easy! nice write up really like the how to sections. great work as always Jason. Show us MORE!! ha ha

Commented on 8-13-2011 At 01:40 am
 

great info would like to see more like this!

Commented on 8-13-2011 At 01:55 am
 

more please!! :)

Commented on 8-13-2011 At 04:22 am
 

deffinately need more how to's for the guys that are new to give us more confidance and solidify our ideas. awesome article. thanks. we need a spacing out the rear tire article and yer basic shit like that from scratch to get yer bike from dream to reality. big thanks again

Commented on 8-13-2011 At 07:00 am
 

+ for more!!!

Commented on 8-13-2011 At 04:04 pm
 

Nice! If you don't have a tig machine, you could also make the bungs slightly larger, and counter bore a hole in them, then make a socket weld. Silver solder or brazing works well. I have made racks and struts that way, and if your welds are grotty like mine, it requires way less clean up.

Commented on 8-13-2011 At 04:13 pm
 

I love these metal shop lessons. but damn you make it look so easy. thanks for the great how to.

Commented on 8-13-2011 At 06:20 pm
 

Nice. he sure is speacial

Commented on 8-14-2011 At 11:23 pm
 

awesome write up. they look great

Commented on 8-24-2011 At 02:58 am
 

Killer info, Wonder if we get to learn more about Fenders soon ? ? ?

Commented on 8-25-2011 At 01:02 am
 

Good info. Good write up Bill.

Commented on 1-1-2012 At 01:42 pm
 

what would we we do without jay? thanks again!!!

Please Login to Comment
Share This



NEWS   FORUM   EVENTS   CLASSIFIEDS   BLOGDUMP   COMMUNITY   MEMBERS
CHOP CULT HOME

 

Advertise    |    Contact    |    ©2009ChopCult    |    Report Abuse    |    Conduct


Chopcult on Facebook